Dust & Odor Controllers

Diesel

image20

The Diesel Dust Controller is another industry first brought to you by Buffalo Turbine. The 3-Cylinder Liquid-Cooled Kohler Diesel Engine allows for portable dust / odor control with the luxury of a fuel type that is common in these industries. This machine is equipped with 270 degree oscillation as well as several fail-safe features that protect the life of the machine. Also the Dust Controller Diesel DOES NOT use nozzle tips, therefore plugging is not an issue with our proprietary rotary atomizing nozzle. This lightweight and portable design makes this machine the perfect fit for any dust or odor issue.


Features:

• Kohler 3 cylinder diesel engine

• Liquid cooled engine, tier-4 compliant

• Low-oil pressure shut-off

• Low intake airflow shut-off

• 3 wheel off-road trailer package for ease of transport

• Extended engine life when compared to traditional gas models

• Dual 6 gallon fuel tanks for additional run time

• New, high speed oscillation up to 270°

Gasoline

image21

The Dust Controller Gasoline offers a mobile solution to any dust / odor control issues. Not only do you get the convenience of a 26.5 HP Gasoline fuel injected engine but you also have the luxury of a wireless controller to help fine tune the machine to various applications. Our Dust & Odor Controller products DO NOT USE nozzle tips so there won’t be any wasted time cleaning out plugged nozzle tips. With a range of 0-20 gallons per minute (GPM) the Dust Controller will help control dust / odor across all industries. Flow rates will depend on the water supply.


Features:

• 3 wheel off-road trailer package for ease of transport

• New, high speed oscillation up to 270°

• Wireless Nozzle and Throttle Control

Instant Idle

• Wireless start/stop function(no choke required)

• 26.5 HP Kohler Fuel Injected Engine with 3 year warranty

• Available without oscillation (CKB5EFIM)

Electric

image22

The Buffalo Turbine Dust Controller line is designed to immediately control and suppress dust and odor in industrial or commercial applications. Improve air quality, lower health risk and help maintain environmental compliance by implementing the Buffalo Turbine Dust Controller at your work site.


Features:

• Three Phase 20 HP Electric Motor

• Three Phase Oscillation Motor

• Variable Speed Blower Control

• Heavy Duty NEMA 4 Rated Control Panel with cooling system

• Gyratory Atomizing Nozzle for Spraying

• Manual pitch adjustment up to 45 degrees

• Oscillating Stand w/Four Settings 0-30-55-80 Degrees

• 3 Wheel Off Road Removable Trailer package

• Heavy Duty Steel Construction

• Fork Pockets for Moving and Lifting

• Throw distances of 100-125 ft in Neutral Wind

• Fluid volume of 1 to 20 gpm

Hydraulic

image23

The Buffalo Turbine Hydraulic Dust Controller misting system is a permanent solution for any dust and odor control, designed for the Demolition, C&D Recycling and Metal Recycling industries. The Hydraulic Dust Controller can be powered by any hydraulic source that has at least 16 gpm flow rates. Simply connect the Gyratory Atomizing Nozzle to a common 3/4″ water line and harness the power of a legendary Buffalo Turbine single stage blower to control and suppress dust and odor particles. Attaches directly to skid-steer style machines, also available in a skid-mount.


Features:

• Hydraulic for Skidsteers and Utility Vehicles with Skidsteer quick mount plate

• Hydraulically driven Blower runs off of any existing equipments auxiliary Hydraulics

• 16gpm to 25gpm Hydraulic required

• Available in Basic skid mount

• Gyratory Atomizing Nozzle

• 12 volt Oscillation stand is available

PTO

image24

The Buffalo Turbine PTO Dust Controller misting system attaches to common 540 PTO drives for dust suppression in the Demolition, C&D Recycling and Metal Recycling industries. Quick mounts to most three point hitch configurations. Connect the proprietary Gyratory Atomizing Nozzle to a common 3/4″ garden hose and harness the power of a legendary Buffalo Turbine single stage turbine to control and suppress dust, odor and smoke particles. At 240lbs, the PTO Dust Controller is by far the lightest option available on the market for controlling dust in a large scale application.


Features:

• Gyratory Atomizing Nozzle

• 12 volt Remote Nozzle Control w/ 12ft cable

• Direct Drive Gearbox

• 12” Round Blower Nozzle for Debris Blowing

• Cost Effective

• Lightweight Heavy Duty Steel Construction

• Low Maintenance

• Minimum 20 HP required at the PTO

• Anti Skid Roller

Gyratory Atomizing Nozzle

image25

• Single, low maintenance non-plugging nozzle generates atomized water mist to control and suppress dust, odor, and smoke particulates

• Uses standard municipal water pressure and common 3/4″ garden hose connection

• Adjust water volume from 0 to 20 gallons per minute

• Change spray direction with remote control for non-electric models

• Horizontal spray over 125′ in neutral wind

• Vertical spray over 50′ in neutral wind

Video

Diesel Dust & Odor Controller